Features
Medium wall cross-linked polyolefin
Flame retardant
Reduces bus bar clearance requirement
Protects against short circuit and electrical leakage caused by small animals
Operating temperature: -40~105℃
Shrink temperature: 125℃
Shrink ratio: 2.5:1
Voltage class: 6~24kV
Typical application
-Suitable for insulation and protection of bus bar against accidental flashover up to 24 KV
-Ideal for using in switchgears cabinets where space is limited and air spacing between bus bars need to be kept at minimal
Technical Data
Dimensions
Reference As supplied(mm) After recovered(mm) Standard length
UPM S1
-10 ID min. ID max. WT nom. m/spool
25/10 25 10 2.50 25
30/12 30 12 2.65 20
40/16 40 16 2.65 20
50/20 50 20 2.65 20
65/25 65 25 2.85 20
75/30 75 30 2.85 20
85/35 85 35 2.85 20
100/40 100 40 2.85 20
120/50 120 50 2.85 20
150/60 150 60 2.90 20
175/75 175 75 2.90 20
Product Selection
Bus bar size (mm) Single layer bus bar Two layers bus bar
20×3,25×3 Φ25/10 Φ30/12
30×3,30×4 Φ30/12 Φ40/16
30×10,40×4 Φ40/16 Φ50/20
40×10,50×5,50×6 Φ50/20 Φ65/25 (Φ75/30)
50×8,50×10,60×6,60×8 Φ65/25 (Φ75/30) Φ75/30(Φ85/35)
60×10,80×6,80×8,80×10 Φ75/30(Φ85/35) Φ100/40(Φ120/50)
100×8,100×10,100×12 Φ100/40(Φ120/50) Φ120/50
100×15,120×10,120×12,120×15 Φ120/50 Φ150/60
150×12,150×15 Φ150/60 Φ175/75
Cross reference
Sumitomo: IRRAX sleeve SBI 300
Ordering
Standard color:Red
Standard packaging on spools.
FAQ
Q1. How long time for delivery?
A: Normally for red color, we have stock, if no stock, we will make delivery within 7days. For bus bar tube, we can supply both in spool also in piece.BusBar Insulation Heat Shrink Tube suppliers
website:http://www.heatshrinkupm.com/mv-hv-heat-shrink-tubes/busbar-insulation-heat-shrink-tube/
Medium wall cross-linked polyolefin
Flame retardant
Reduces bus bar clearance requirement
Protects against short circuit and electrical leakage caused by small animals
Operating temperature: -40~105℃
Shrink temperature: 125℃
Shrink ratio: 2.5:1
Voltage class: 6~24kV
Typical application
-Suitable for insulation and protection of bus bar against accidental flashover up to 24 KV
-Ideal for using in switchgears cabinets where space is limited and air spacing between bus bars need to be kept at minimal
Technical Data
Dimensions
Reference As supplied(mm) After recovered(mm) Standard length
UPM S1
-10 ID min. ID max. WT nom. m/spool25/10 25 10 2.50 25
30/12 30 12 2.65 20
40/16 40 16 2.65 20
50/20 50 20 2.65 20
65/25 65 25 2.85 20
75/30 75 30 2.85 20
85/35 85 35 2.85 20
100/40 100 40 2.85 20
120/50 120 50 2.85 20
150/60 150 60 2.90 20
175/75 175 75 2.90 20
Product Selection
Bus bar size (mm) Single layer bus bar Two layers bus bar
20×3,25×3 Φ25/10 Φ30/12
30×3,30×4 Φ30/12 Φ40/16
30×10,40×4 Φ40/16 Φ50/20
40×10,50×5,50×6 Φ50/20 Φ65/25 (Φ75/30)
50×8,50×10,60×6,60×8 Φ65/25 (Φ75/30) Φ75/30(Φ85/35)
60×10,80×6,80×8,80×10 Φ75/30(Φ85/35) Φ100/40(Φ120/50)
100×8,100×10,100×12 Φ100/40(Φ120/50) Φ120/50
100×15,120×10,120×12,120×15 Φ120/50 Φ150/60
150×12,150×15 Φ150/60 Φ175/75
Cross reference
Sumitomo: IRRAX sleeve SBI 300
Ordering
Standard color:Red
Standard packaging on spools.
FAQ
Q1. How long time for delivery?
A: Normally for red color, we have stock, if no stock, we will make delivery within 7days. For bus bar tube, we can supply both in spool also in piece.BusBar Insulation Heat Shrink Tube suppliers
website:http://www.heatshrinkupm.com/mv-hv-heat-shrink-tubes/busbar-insulation-heat-shrink-tube/